ALU Construction: Control Card Power Rails & Wire Wrap

I've been a bit short of time lately so I've been working on the ALU Control Card in little bursts ... but after lots of these little bursts I've now got all the power rails and wire wrap done for this card.

Here's the card as it currently stands:
... and this is how the power rails look on the solder side of the card ...
With the rails and wire wrap all done the card just needs the relays popping in and it should be ready for a test drive.

Comments

Popular posts from this blog

ALU Design: 1-bit Arithmetic Unit

ALU Design: 8-bit Arithmetic Unit

Decoder Design: MOV-8, ALU & SETAB